Juniper JUNOSE 11.2.X MULTICAST ROUTING, Руководство по настройке

Страница: 61 / 256

C-bit severely errored seconds = 1
C-bit coding violations = 330
Unavailable seconds = 0
Invalid seconds = 0
•
Field descriptions for a T1 channel
•
DS1—Identifier of T1 channel
•
Number of valid intervals—Number of 15-minute intervals since the line module was
last powered on or reset
•
Time elapse in current interval—Number of seconds that have passed in the 15-minute
(900-second) interval
•
Far End FDL Carrier bit—Status of FDL configuration on remote device connected to
T1 channel
•
set—FDL is configured for carrier mode
•
not set—FDL is not configured for carrier mode
•
Far End Equipment Identification Code—eic string sent by remote device for FDL
•
Far End Line Identification Code—lic string sent by remote device for FDL
•
Far End Frame Identification Code—fic string sent by remote device for FDL
•
Far End Unit Identification Code—unit string sent by remote device for FDL
•
Far End Facility Identification Code—pfi string sent by remote device for FDL
•
Far End Generator Number—generator string sent by remote device for FDL
•
Far End Port Number—port string sent by remote device for FDL
•
Errored seconds—Number of errored seconds encountered by a T1 in the current
interval
•
Severely errored seconds—Number of severely errored seconds encountered by a
T1 in the current interval
•
Severely errored frame seconds—Number of severely errored framing seconds
encountered by a T1 in the current interval
•
Unavailable seconds—Number of unavailable seconds encountered by a T1 in the
current interval
•
Clock slip seconds—Number of clock slips encountered by a T1 in the current interval
•
Path code violations—Number of coding violations encountered by a T1 in the current
interval
•
Line errored seconds—Number of line errored seconds encountered by a T1 in the
current interval
39 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Configuring Channelized T3 Interfaces