Juniper JUNOSE 11.2.X MULTICAST ROUTING, Руководство по настройке

Страница: 62 / 256

•
Bursty errored seconds—Number of bursty errored seconds encountered by a T1 in
the current interval
•
Degraded minutes—Number of minutes that a T1 line is degraded
•
Example—In this example, a T1 channel is specified.
host1# show controllers t1 10/1:1 remote
DS1 10/1:1
Number of valid interval - 0
Time elapse in current interval - 0
Far End FDL Carrier bit is not set
Far End Equipment Identification Code is the null string
Far End Line Identification Code is the null string
Far End Frame Identification Code is the null string
Far End Unit Identification Code is the null string
Far End Facility Identification Code is the null string
Far End Port Number is the null string
Far End Generator Number is the null string
DS1 Current Interval Counters
Errored seconds = 0
Severely errored second = 0
Severely errored frame seconds = 0
Unavailable seconds = 0
Clock slip seconds = 0
Path code violations = 0
Line errored seconds = 0
Bursty errored seconds = 0
Degraded minutes = 0
DS1 24 Hour Total Counters
Errored seconds = 0
Severely errored second = 0
Severely errored frame seconds = 0
Unavailable seconds = 0
Clock slip seconds = 0
Path code violations = 0
Line errored seconds = 0
Bursty errored seconds = 0
Degraded minutes = 0
•
See show controllers t3 remote.
show controllers t3 serial
•
Use to display the state of the serial interface.
•
Field descriptions
•
Description—Text description or alias if configured for the interface
•
ifOperStatus—Physical status of the interface
•
ifOperUp—Interface is functioning
•
ifOperTesting—Interface is being tested
Copyright © 2010, Juniper Networks, Inc. 40
JunosE 11.2.x Physical Layer Configuration Guide