Juniper JUNOSE 11.2.X MULTICAST ROUTING, Руководство по настройке

Страница: 184 / 256

•
Far End Generator Number—generator string sent by remote device for MDL
•
Far End Port Number—port string sent by remote device for MDL
•
Number of valid intervals—Number of 15-minute intervals since the line module was
last powered on or reset
•
Time elapse in current interval—Number of seconds that have passed in the 15-minute
(900-second) interval
•
C-bit errored seconds—Number of C-bit errored seconds encountered by a T3 in the
current interval
•
C-bit severely errored seconds—Number of C-bit severely errored seconds
encountered by a T3 in the current interval
•
C-bit coding violations—Number of C-bit coding violations encountered by a T3 in
the current interval
•
Unavailable seconds—Number of unavailable seconds encountered by a T3 in the
current interval
•
Invalid seconds—Number of seconds when statistics were not collected
•
Field descriptions for a T1 channel
•
DS1—Identifier of T1 channel
•
Number of valid intervals—Number of 15-minute intervals since the line module was
last powered on or reset
•
Time elapse in current interval—Number of seconds that have passed in the 15-minute
(900-second) interval
•
Far End FDL Carrier bit—Status of FDL configuration on remote device connected to
T1 channel
•
set—FDL is configured for carrier mode
•
not set—FDL is not configured for carrier mode
•
Far End Equipment Identification Code—eic string sent by remote device for FDL
•
Far End Line Identification Code—lic string sent by remote device for FDL
•
Far End Frame Identification Code—fic string sent by remote device for FDL
•
Far End Unit Identification Code—unit string sent by remote device for FDL
•
Far End Facility Identification Code—pfi string sent by remote device for FDL
•
Far End Generator Number—generator string sent by remote device for FDL
•
Far End Port Number—port string sent by remote device for FDL
Copyright © 2010, Juniper Networks, Inc. 162
JunosE 11.2.x Physical Layer Configuration Guide