Juniper JUNOSE 11.0, Справочник по командам

Страница: 551 / 1486

Options
■
bindingId —DHCP binding ID for a specific client
■
all—Specifies all DHCP local server, DHCP external server, and DHCP relay proxy
client bindings
■
all-local—Specifies all DHCP local server client bindings
■
all-external—Specifies all DHCP external server client bindings
■
all-relay-proxy—Specifies all DHCP relay proxy client bindings
■
local—Specifies DHCP local server client bindings that meet the deletion criteria
■
external—Specifies DHCP external server client bindings that meet the deletion
criteria
■
relay-proxy—Specifies DHCP relay proxy client bindings that meet the deletion
criteria
■
subnetAddress —IP address of the subnet on which the DHCP clients reside
■
ipPrefix —IP prefix (address and subnetwork mask) of the DHCP clients; for
example, 10.10.10.0/24
■
no-interface—Specifies DHCP clients without a lower-layer interface; use this
keyword to delete DHCP client bindings configured over dynamic interfaces for
which the lower-layer interface has been shut down
■
string —Regular expression string that represents the interface, circuit ID, or
remote ID to be matched; you must enclose elements containing a space within
double quotes (“
one element ”)
Each element is either a literal string, a metacharacter, or a combination. You
can remove the special meaning of a metacharacter by preceding it with a
backslash (\). Regular expressions support the following metacharacters:
■
^ Matches the beginning of the input string. Alternatively, when used as the
first character within brackets—[^ ]—matches any number except the ones
specified within the brackets.
■
$ Matches the end of the input string
■
. (period) Matches any single character, including white space
■
* Matches 0 or more sequences of the immediately previous character or
pattern.
■
+ Matches 1 or more sequences of the immediately previous character or
pattern
■
? Matches 0 or 1 sequence of the immediately previous character or pattern
■
( ) Specifies patterns for multiple use when followed by one of the multiplier
metacharacters: asterisk *, plus sign +, or question mark ?
■
[ ] Matches any enclosed character; specifies a range of single characters
■
– (hyphen) Used within brackets to specify a range of AS or community
numbers
■
_ (underscore) Matches a ^, a $, a comma, a space, a {, or a }. Placed on
either side of a string to specify a literal and disallow substring matching.
dhcp delete-binding
■ 509
Chapter 5: D Commands