Juniper JUNOSE 11.0, Справочник по командам

Страница: 1370 / 1486

mpls explicit-path
Syntax
{ ip | mpls } explicit-path { name name | identifier number } [ enable | disable ]
no { ip | mpls } explicit-path { name name | identifier number }
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Defines an explicit path by name or ID number and also enables or disables the
explicit path. The
no version deletes the explicit path.
Options
■
ip—Specifies alternative keyword for compatibility with non–E Series
implementations
■
mpls—Specifies JUNOSe MPLS implementation
■
name —Name for the explicit path; string of up to 20 characters
■
number —Number identifying the explicit path in the range 1–65535
■
enable—Reenables the explicit path that was previously disabled on the virtual
router; to prevent a partially configured explicit path from being used, do not
enable it until you have finished configuring or modifying the path
■
disable—Disables the explicit path that was previously enabled on the virtual
router
Mode
Global Configuration
1328 ■
mpls explicit-path
JUNOSe 11.0.x Command Reference Guide A to M