Juniper JUNOSE 11.0, Справочник по командам

Страница: 699 / 1486

gre-tunnel policy
Syntax
gre-tunnel policy { input | output } policyName
[ statistics { enabled | disabled | preserve } | merge ]
no gre-tunnel policy { input | output } [ policyName ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
merge keyword added in JUNOSe Release 7.2.0.
Description
Assigns a GRE tunnel policy list to an interface. If you enter the gre-tunnel policy
command and the policy list does not exist, the router creates a policy list with no
rules, the default. Attaching this policy list to an interface filters all packets on that
interface. You must specify the
input or output keyword to assign the policy list to
the ingress or egress of the interface. The no version removes the association between
a policy list and an interface.
Options
■
input—Applies policy to data arriving at this interface
■
output—Applies policy to data leaving this interface
■
policyName —Name of the policy; a maximum of 40 characters
■
statistics—Enables or disables collection of policy routing statistics
■
enabled—Enables collection of policy routing statistics
■
disabled—Disables collection of policy routing statistics
■
preserve—Preserves existing statistics for any classifier-list that is the same
for both the new and old policy attachments when you attach a new policy
to an interface
■
merge—Enables merging of multiple policies to form a single policy
Mode
Interface Configuration
Related Topics
■
Setting a Statistics Baseline for Policies
gre-tunnel policy
■ 657
Chapter 8: G Commands