Juniper JUNOSE 11.0, Справочник по командам

Страница: 103 / 1486

aaa timeout
Syntax
To set the default idle timeout:
aaa timeout idle idleTimeout
no aaa timeout idle
To set the default session timeout:
aaa timeout session sessionTimeout
no aaa timeout session
To enable monitoring of only ingress traffic for the configured idle timeout period:
aaa timeout idle ingress-only
no aaa timeout idle [ ingress-only ]
Release Information
Command introduced before JUNOSe Release 7.1.0.
ingress-only keyword added in JUNOSe Release 9.3.0.
Description
Sets the default idle timeout or session timeout for B-RAS PPP users, and optionally
enables the PPP application to monitor only ingress traffic for the configured idle
timeout period to determine whether to disconnect an inactive PPP session. The
no
version restores the idle timeout or session timeout to its default value, 0 seconds,
and disables ingress-only traffic monitoring for idle timeout if configured. .
NOTE: To enable ingress-only traffic monitoring for the idle timeout period by issuing
the aaa timeout idle ingress-only command, you must also set the idle timeout
value by issuing the aaa timeout idle command.
Options
idleTimeout —In seconds, 300–86400
■
■
sessionTimeout —Time in the range 60–31622400 seconds (that is, a minimum
of 1 minute to a maximum of 366 days); the router terminates the user session
once the maximum session timeout is reached, which means that the duration
of a PPP or an L2TP user session cannot exceed 366 days
■
ingress-only—Enables PPP to monitor only ingress traffic for the configured idle
timeout period to determine whether to disconnect an inactive PPP session; if
you do not specify the
ingress-only keyword, PPP monitors both ingress traffic
and egress traffic for the idle timeout period to determine inactivity and
subsequent disconnection of an inactive PPP session
Mode
Global Configuration
aaa timeout
■ 61
Chapter 2: A Commands