Juniper JUNOSE 11.0, Справочник по командам

Страница: 356 / 1486

bridge address
Syntax
bridge { bridgeGroupName | vplsName } address macAddress
{ forward interfaceType interfaceSpecifier | discard }
no bridge { bridgeGroupName | vplsName } address macAddress
Release Information
Command introduced before JUNOSe Release 7.1.0.
vplsName variable added in JUNOSe Release 7.1.0.
Description
Enables a bridge group or VPLS instance to filter (forward or discard) frames based
on their MAC address. Use this command to filter frames by a specific MAC address
and to add a static (nonlearned) entry to the forwarding table. The
no version removes
the static MAC address entry from the forwarding table.
NOTE: For a VPLS instance, you cannot create a static (nonlearned) MAC address
entry to forward to the VPLS virtual core interface.
Options
■
bridgeGroupName —Name of a bridge group specified with the bridge command
■
vplsName —Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
■
macAddress —Unique 48-bit (6-byte) number that is programmed into each LAN
network interface card (NIC) at the time of manufacture; also known as a
hardware address or physical address. The MAC address format is a dotted triple
of four-digit hexadecimal numbers; for example, 0090.1a40.4c7c
■
forward — Forwards frames destined for the specified MAC address out the
specified network interface
■
interfaceType —One of the following interface types listed in “Interface Types
and Specifiers” on page 5
■
atm
■
fastEthernet
■
gigabitEthernet
■
tenGigabitEthernet
■
interfaceSpecifier— Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
■
discard — Discards (drops) frames sent from or destined for the specified MAC
address without further processing
Mode
Global Configuration
314 ■
bridge address
JUNOSe 11.0.x Command Reference Guide A to M