Juniper JUNOSE 11.0, Справочник по командам

Страница: 1392 / 1486

mpls ldp redistribute
Syntax
mpls ldp redistribute protocol [ route-map mapName ]
no mpls ldp redistribute protocol [ route-map mapName ]
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Enables redistribution of routes from the specified IGP to LDP, enabling LDP to
advertise labeled BGP routes for the inter-AS option C two-stack scenario. The
no
version halts redistribution from the specified IGP or according to the specified route
map.
You can specify a route map to redistribute more specific routes to LDP. Only routes
that pass the maps clauses are redistributed. If you do not use a route map for
fine-grained control of route distribution, and you do not want to redistribute BGP
routes, then you do not need to issue this command.
For backward compatibility, if you do not issue this command, LDP continues to
advertise labels for IGP routes—including connected, static, IS-IS, OSPF, and RIP
routes, but excluding BGP routes. That is, IGP routes other than BGP are redistributed
to LDP by default.
Options
protocol —Protocol from which routes are redistributed to LDP: BGP, connected,
IS-IS, OSPF, RIP, or static
■
■
mapName —Name of the route map used to redistribute more specific routing
information from an IGP to LDP
Mode
Global Configuration
1350 ■
mpls ldp redistribute
JUNOSe 11.0.x Command Reference Guide A to M