Juniper JUNOSE 11.0, Справочник по командам

Страница: 375 / 1486

bulkstats collector
Syntax
bulkstats collector collectorIndex
[ collect-mode { auto-xfer | on-file-full | manual-xfer } | description descrip |
interval intrvl | max-size maxSize | primary-receiver primRecvIndex |
secondary-receiver secRecvIndex | single-interval ]
no bulkstats collector collectorIndex [ collect-mode | description | interval | max-size
|primary-receiver | secondary-receiver | single-interval ]*
Release Information
Command introduced before JUNOSe Release 7.1.0.
Description
Creates and configures a collector of bulk statistical data to collect MIB-2 ifTable MIB
objects. You can configure up to six collectors. The
no version restores the default
value for specified options; if no options are specified, the no version deletes the
collector.
Options
■
collectorIndex —Number in the range 1–65535 that identifies the particular data
collector
■
collect-mode—Specifies one of the following collection modes:
■
auto-xfer—Agent automatically transfers file when interval expires
■
on-file-full—Agent automatically transfers file when it is full
■
manual-xfer—Router or user-initiated transfers; default collection mode
■
descrip —Descriptive information to insert into the bulkstats file
■
intrvl —Time period in the range 300– 86400 seconds for which the collector
transfers data from the router to the receivers; default interval is 360 seconds
■
maxSize —Maximum size of the file in the range 10240–20971520 bytes; default
file size is 2,621,440 bytes
■
primRecvIndex —Number in the range 1–65535 that identifies the primary receiver
to which the router transfers the data; by default the primary receiver is cleared
■
secRecvIndex —Number in the range 1–65535 that identifies the secondary
(backup) receiver to which the router transfers the data; by default the secondary
receiver is cleared
■
single-interval—Specifies that the collector retrieves the bulk statistics data only
once; by default, the collector receives the data periodically
■
*—Indicates that one or more parameters can be repeated multiple times in a
list in the command line
Mode
Global Configuration
bulkstats collector
■ 333
Chapter 3: B Commands