Juniper G10 CMTS, Руководство по оборудованию

Страница: 33 / 210

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
System Overview
G10 CMTS Hardware Overview
17
Rear Features
!
HFC Connector Module—Module that functions as the DOCSIS Module’s physical access
to both the NSI and the HFC interfaces on the rear of the chassis.
!
Switched I/O Module—Provides the same functions as an HFC Connector Module, but
provides four additional upstream F-connectors for the HFC cabling.
!
NIC Access Module—Module that provides the network connections between the NIC
Modules and the HFC Connector Modules.
!
Hard Disk Module—Contains the system nonvolatile memory implemented as a hard
disk. This module is installed opposite the Chassis Control Module.
!
Rear fan tray—Fan assembly that forces air upward through the rear of the chassis.
!
Rear fan tray LED—LED that shows the status of the rear fan tray.
!
Air management panel—Panel installed over an unused module slot to redirect the air
flow through the chassis and to reduce EMI emissions.
!
Air exhaust—Panel along the top and rear of the chassis where air is expelled from the
chassis for cooling.
!
AC power transition module—Rear module that distributes the externally supplied AC
power to the midplane.
!
AC power receptacle—AC power cord receptacle on AC power transition module.
!
AC power switch—AC power On/Off switch that resides on the AC power transition
module.
!
DC power transition module—Rear module that distributes the externally supplied DC
power to the midplane.
!
DC power receptacle—DC power cord terminal block on DC power transition module.
!
Chassis ground nuts—Location where the earth ground connection to the chassis is
made.