• Two front-mounting brackets and 16 screws to secure the brackets to the chassis (provided in the
accessory box shipped with the switch)
• Two rear-mounting brackets (provided in the accessory box shipped with the switch)
• Four ETSI brackets.
shows the ETSI brackets provided with EX9251 switches.
Figure 28: ETSI Brackets
• Eight screws to secure the chassis to the rack (not provided)
• Cover panels for power supply slots
To mount the switch on an ETSI rack:
1.
Position the switch in front of the rack.
2.
Align the front-mounting brackets along the front panel of the switch chassis (see
Figure 29: Attaching the Front-Mounting Brackets to the Switch Chassis
3.
Align the bottom holes in the front-mounting brackets with the holes on the side panels of the
switch chassis.
4.
Insert mounting screws into the aligned holes. Tighten the screws by using the
Phillips (+) screwdriver, number 2.
5.
Ensure that the other holes in the front-mounting brackets are aligned with the holes in the side
panels. Insert a screw in each hole and tighten the screws by using the Phillips (+) screwdriver,
number 2.
78