Table 33: Parts Required for Connecting an EX Series Switch to Earth Ground
(Continued)
Switch
Earthing
Terminal
Location
Grounding
Cable
Requirements
Grounding Lug
Specifications
Screws and
Washers
Additional
Information
EX6210
Rear panel of
the chassis
(on lower left
side)
The grounding
cable must be
the same gauge
as the power
feed cables and
as permitted by
the local code.
Panduit LCD2-14A-
Q or equivalent
—provided
•
Two ¼ -20
x 0.5 in.
screws with
#¼” split-
washer
—provided
•
Two #¼” flat
washers—
provided
EX8208
Left side of
the chassis
6 AWG
(13.3 mm²),
minimum 90° C
wire, or as
permitted by
the local code
Panduit LCD2-14A-
Q or equivalent
—provided
•
Two ¼ -20
x 0.5 in.
screws with
#¼” split-
washer
—provided
•
Two #¼” flat
washers—
provided
87
