Juniper BX7000, Руководство по оборудованию, Страница: 46 / 138

CHAPTER 4: Installing the Gateway
28 Installing the Cable Management brackets Copyright © 2010, Juniper Networks, Inc.
Installing the Cable Management brackets
You attach the cable management brackets vertically to each side of the chassis at the front. Use
the cable management brackets to keep the cables organized. Avoid bending optical cables
beyond the proper bend radius. The cable management bracket evenly distributes the weight of a
cable so that the cable is not subjected to undue stress at the connector.
To install the cable management bracket (see Figure 14 on page 28):
1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the
strap to one of the ESD points on the chassis. For more information about ESD, see
“Preventing Electrostatic Discharge Damage” on page 83.
2. Position the cable management bracket into the slots on the front of the chassis.
3. Use a number 1 Phillips screwdriver to tighten the M3 X 6 screws that are provided to secure
the cable management bracket to the chassis.
Figure 14 Installing the Cable Management Bracket
g002938
CLOCK CARD
EXP
ANSION B
AY
INTERF
ACE CARD
EXP
ANSION B
AY