Jungheinrich DFG 425s, Руководство по эксплуатации

Страница: 226 / 229

225
03.13 EN
Crane hook
Load backrest
Lift Control
Safety restraint system / SUN protector
Impact sensor
Sideshifter
Hydraulic operations W A B C
1
Check attachment is properly secured to the truck and the
supporting elements.
t
Hyd. operations W A B C
1
Check attachment is properly secured to the truck and the
supporting elements.
t
Hydraulic operations W A B C
1 Check the "Lift Control".
t
Chassis and Superstructure W A B C
1
Make sure restraint system is complete, test operation and check for
damage.
t
Electrical System W A B C
1 Check impact sensor is secure and check for damage.
t
Hydraulic operations W A B C
1 Check axial play of the front and rear rollers and adjust if necessary.
t
2
Check attachment is properly secured to the truck and the
supporting elements.
t
3 Test attachment, check settings and check for damage.
t
4 Check sliding blocks are complete.
t
5
Check attachment bearing points, guides and stops for wear and
damage, grease and clean these components.
t
6 Check attachment lubrication; clean and lubricate if necessary.
t
7 Check hydraulic ports and tighten if necessary.
t
8 Test the sideshifter, check settings and check for damage.
t
9 Check cylinder seals.
t
10 Check cylinder piston rods and bushings.
t