Jungheinrich DFG 425s Скачать руководство пользователя

Страница: 98 / 229

03.13 EN

Positioning the forks with an integrated
fork positioner (option)

CAUTION!

Do not use the fork positioner to clamp
loads.

Requirements

– Truck prepared for operation, see

"Preparing the truck for operation" on
page 76.

Procedure

• Press the (85) button and at the same time turn the MULTI-PILOT (78) anti-

clockwise, the forks will spread apart.

• Press the (85) button and at the same time turn the MULTI-PILOT (78) anti-

clockwise, the forks will move together.

The forks are now positioned.

Synchronising the alignment of the fork
tines with an integrated fork positioner
(optional equipment)

Requirements

– Truck prepared for operation, see

"Preparing the truck for operation" on
page 76.

– The fork tines are no longer aligned.

Procedure

• Press the (85) button and at the same time

turn the MULTI-PILOT (78) anti-clockwise,
the forks will spread apart.

• Press the (85) button and at the same time turn the MULTI-PILOT (78) anti-

clockwise, the forks will move together.

The fork tines are now synchronised.

When the limit position for the operation has been reached (there will be a noise
from the pressure relief valve) release the lever. The lever will revert automatically
to neutral.

Содержание DFG 425s






































































































































































































































Результаты поиска

Содержание DFG 425s

Отзывы:

Похожие инструкции для DFG 425s

Бренды по названию

Популярные бренды

Jungheinrich DFG 425s, Руководство по эксплуатации

Результаты поиска

Содержание DFG 425s

Отзывы:

Похожие инструкции для DFG 425s

Бренды по названию

Популярные бренды