Jungheinrich DFG 425s Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 229

Jungheinrich DFG 425s Скачать руководство пользователя страница 43

03.13 EN

42

NOTE

Fuel can cause environmental damage

X

Bind any spilled diesel fuel with suitable methods.

X

Then dispose of the diesel and fuel filter in accordance with environmental
regulations.

Fuel filling and LPG bottle replacement personnel

Personnel filling the trucks or replacing LPG bottles must have sufficient knowledge
of the nature of fuels to ensure safe operation.

CAUTION!

Liquid gas can cause frostbite

X

Liquid gas produces frostbite when it comes into contact with bare skin.

X

Avoid direct contact with the skin.

X

Wear gloves.

Filling up LPG containers

LPG containers remain attached to the truck and are filled up at LPG stations. Always
follow the instructions of the tank system and LPG container manufacturer as well as
statutory and local regulations when filling up.

NOTE

Instructions for the safe operation of LPG systems

X

All maintenance and repair work on LPG systems and containers should be carried
out by qualified personnel who have been trained to work on LPG systems.

X

The owner must comply with all legal requirements, technical standards and health
and safety regulations applicable to liquid gas.

X

Before starting work, the driver must check that all accessible components of the
LPG system are in good working order, in accordance with the regulations of the
country of use.

X

Do not operate the truck if there is any damage, corrosion, wear or degradation to
individual components of the LPG system.

«
...
41
42
43
44
45
...
»

Содержание DFG 425s






































































































































































































































Отзывы:

Нет отзывов