Jungheinrich DFG 425s Скачать руководство пользователя страница 69

Страница: 69 / 229

03.13 EN

3.4

Setting up the operator position

WARNING!

Accidents can occur if the driver's seat, steering column and armrest are not
engaged

The driver's seat, steering column and armrest can accidentally adjust during travel
and therefore cannot be operated safely.

Do not adjust the driver’s seat, steering column or armrest while travelling.

Procedure

• Before starting to travel, adjust the driver’s seat, steering column and armrest (if

necessary) so that all the controls are within reach and can be applied without
having to strain.

• Adjust the visibility aid equipment (mirrors, camera systems etc.) so that the working

environment can be clearly seen.

3.4.1 Adjusting the driver’s seat

WARNING!

Risk of accidents and damage to health

An incorrectly adjusted driver’s seat can result in accidents and damage to health.

Do not adjust the driver’s seat while travelling.

The driver’s seat should lock in position after adjustment.

Check and adjust the individual driver's seat setting before starting up the truck.

Hold the weight setting lever only by the recess, do not reach through underneath
the lever.

Содержание DFG 425s






































































































































































































































Результаты поиска

Содержание DFG 425s

Отзывы:

Jungheinrich DFG 425s, Руководство по эксплуатации, Страница: 69 / 229

Результаты поиска

Содержание DFG 425s

Отзывы: