Jungheinrich DFG 425s Скачать руководство пользователя

Страница: 37 / 229

03.13 EN

2.2

Lifting the truck by crane

CAUTION!

The mast can get damaged

Loading by crane is only intended for the initial transport before the truck is used for
the first time.

Loading must be carried out by specially trained staff in accordance with
recommendations contained in Guidelines VDI 2700 and VDI 2703

DANGER!

Crane slings can tear, resulting in accidents

Only use crane lifting gear with sufficient capacity.

Loading weight = Net weight of truck (+ battery weight for electric trucks).

The mast must be tilted back fully.

The crane lifting gear on the mast must have a minimum clear length of 2 m.

Crane slings should be fastened in such a way that they do not come into contact
with any attachments or the overhead guard when lifting.

Do not stand under a swaying load.

The truck should only be handled by people who are trained in using lifting slings
and tools.

Wear safety shoes when lifting the truck by crane.

Do not walk into or stand in a hazardous area.

Always attach the crane lifting gear to the prescribed strap points and prevent them
from slipping.

Truck net weight: see "Data plate" on page 32.

Lifting the truck by crane

Requirements

– Park the truck securely, see "Parking the

truck securely" on page 79.

Procedure

• Secure the crane slings to the attachment

points (51) and (50.

• Raise and load the truck.
• Lower and deposit the truck carefully (see

"Parking the truck securely" on page 79).

• Secure the truck with wedges to prevent it

from rolling away.

This concludes the loading by crane.

Содержание DFG 425s






































































































































































































































Результаты поиска

Содержание DFG 425s

Отзывы:

Похожие инструкции для DFG 425s

Бренды по названию

Популярные бренды

Jungheinrich DFG 425s, Руководство по эксплуатации

Результаты поиска

Содержание DFG 425s

Отзывы:

Похожие инструкции для DFG 425s

Бренды по названию

Популярные бренды