Jungheinrich DFG 316, Руководство по эксплуатации

Страница: 88 / 103

F 19
11
0
6
.G
B
Replacing the engine oil filter
– Undo the oil filter (20) with a filter wrench and manually unscrew it.
F
Collect any emerging oil and dispose of the oil and oil filter in accordance with
environmental regulations.
– Thoroughly clean the raised faces of the oil filter flange.
– Apply a thin layer of fresh engine oil to the seal of the new oil filter.
– Hand-tighten the oil filter.
Adding engine oil
– Add fresh engine oil through the filler port in accordance with the consumables
table (see Section 9.1).
Capacity: 4.0 l
– Check the engine oil level with the
dipstick (19) and adjust as necessary..
– Screw the lid back on.
– Insert the dipstick back fully.
M
After changing the oil and the oil filter,
note the engine oil pressure indicator
(22) when running the engine again and
check the oil drain plug and oil filter are
sealed.
18