Jungheinrich DFG 316, Руководство по эксплуатации

Страница: 86 / 103

F 17
11
0
6
.G
B
Replacing the fuel filter
Drain the fuel from the filter into a
suitable container.
Undo the fuel filter (17) with a filter
wrench and manually unscrew it.
F
Dispose of the fuel filter and fuel in
accordance with environmental
regulations.
– Screw the fuel filter with a new O ring
into the new fuel filter.
– Before assembling, apply a thin layer
of diesel to the O ring.
– Thoroughly clean the raised faces of
the filter flange.
– Apply a thin layer of diesel to the seal
of the new fuel filter.
– Manually screw in the fuel filter until the seal contacts the filter flange.
– Tighten the fuel filter another third of a turn.
– Bleed the fuel system
Bleeding the fuel system
F
Collect any emerging fuel and dispose of it in accordance with environmental
regulations.
– Open the discharge screw (16).
– Apply the manual pump lever on the fuel pump (15) until fuel escapes from the
discharge screw without bubbles.
– Tighten the discharge screw.
– Set the ignition / starter key to the
I position for approx. 10 seconds.
– Wait for 10 seconds.
– Repeat the process until the engine starts up.
M
While running the engine check the fuel filter, the discharge valve and the union nuts
of the injection nozzles for leaks.
Z
If the engine does not start up or stops after a short time, repeat the bleeding
procedure.
11
13
12