background image

11

0

6

.G

B

F 4

4

DFG/TFG maintenance checklist

Maintenance intervals
Standard

=

t

W A B C

Brakes

1.1

Check effectiveness of operating and parking brakes,
adjust where necessary and measure braking distance.

t

1.2

Check brake lining wear and check brake drum diameter

t

1.3

Check brake fluid level in container and top up if
necessary

t

1.4

Change brake fluid annually, bleed the system if
required

t

1.5

Check connections and lines for leaks

t

1.6

Check brake mechanism, adjust and lubricate if
necessary

t

Electrics

2.1

Test operation of instruments, displays and control
switches

t

2.2

Test warning and safety devices

t

2.3

Check fuse ratings

t

2.4

Make sure wire connections are secure and check for
damage

t

2.5

Test lighting

t

2.6

Test micro switch setting

t

2.7

Test relay

t

Power supply

3.1

Visually inspect battery

t

3.2

Check battery connections are secure, grease terminals
if necessary.

t

3.3

Check acid density, acid level and battery voltage

t

Truck Design

4.1

Check mast attachment

t

4.2

Check chassis for damage.

t

4.3

Check the counterweight is secure.

t

4.4

Check the overhead guard / cabin for damage.

t

4.5

Check driver’s seat and restraint system

t

4.6

Check labels

t

4.7

Check trailer coupling / tow mechanism

t

Содержание DFG 316








































































































Отзывы: