0
406
.GB
E 14
3.7
Starting procedure for the TFG
F
Note the safety regulations for
handling liquid gas (see Chapter D,
section 1).
– Slowly open the shutoff valve on
the LPG bottle.
– Put the key in the ignition / starter
switch (19).
– Set the ignition / starter key to the
“
I
” position.
– Press the horn button (27) and
test the horn
.
The charging current (3), engine oil
pressure (2), neutral setting (14)
and parking brake (5) indicators
light up.
– Gently apply the accelerator
pedal (22).
– Set the ignition / starter key now
to the
II
position.
M
Only apply the starter for a
maximum of15 seconds without
interruption. Before starting again,
wait 30-60 seconds and reset the
ignition / starter switch to
0
.
– Release the key as soon as the
engine starts. It automatically
returns to the
I
position.
F
When working with LPG trucks it is
essential to always observe the
following safety regulations.
If a truck will not start:
– Close the gas bottle shutoff valve.
– Turn off the ignition / starter
O
.
– Call for a trained, authorised customer service engineer.
M
All indicators lights except for neutral setting (14) and parking brake (5) should go out
as soon as the engine starts. If not, stop the engine immediately and rectify the fault.
14
3
5
2
27
22
19
Содержание DFG 316
