Jungheinrich DFG 316, Руководство по эксплуатации

Страница: 49 / 103

0
406
.GB
E 16
F
After starting the engine, carry
out a test run and check the
following functions:
– Test the parking brake (16)
and the slow travel /
brake pedal (29).
– Test the engine speed with
the accelerator pedal (22)
over a range of speeds
while checking the freedom
of movement of the pedal.
– Test the operation of the
raise/lower (26), tilt (25) and
if applicable the attachment
hydraulic control functions.
– Turn the steering wheel
(17) as far as it will go in
both directions and test the
steering.
M
Do not run up the engine in
idle. The engine soon reaches
operating temperature at a
moderate charge and when
the speed alternates.
Only fully charge the engine
when the engine coolant
temperature display (10)
shows operating temperature.
The truck is ready for
operation once all the
functional controls have been
satisfactorily performed and
operating temperature is
reached.
22
26
25
17
10