Jungheinrich DFG 316, Руководство по эксплуатации

Страница: 85 / 103

11
0
6
.G
B
F 16
Adding engine oil
– Add fresh engine oil through the filler
port (6) in accordance with the
consumables table.
Capacity: 8.0 l
– Check the engine oil level with the
dipstick (12) and adjust as necessary.
– Screw the lid (6) back on.
– Insert the dipstick (12) back fully.
M
After changing the oil and the oil filter,
note the engine oil pressure indicator
(13) when you run the engine again and
check the oil drain plug and oil filter are
sealed.
Checking the V belt tension
– Insert the V belt between the fan V belt
pulley and the generator V belt pulley
using a force of
45 N .
It should be possible to insert the V belt
after approx.
10 mm .
Adjusting the V belt tension
– Undo the screw (14) and pull the AC
generator until the prescribed V belt
tension has been reached.Tighten the
screws again.
– Check the V belt tension again and
repeat the adjustment if necessary.
9
2
8
4 3
10