JUKI SC-922, Инструкция по эксплуатации

Страница: 20 / 58

– 18 –
3. operating procedure of the sewing pattern
Without reverse
stitching
reverse
stitching
Double reverse
stitching
(Caution) 1. For the operation panel other than CP-18, refer to the Instruction Manual for the operation
panel to be used.
2. For some machine heads, reverse-stitching pattern cannot be used.
(1) reverse feed stitching pattern
Reverse feed sttchng at sewng start and reverse feed sttchng at sewng end can be separately pro-
grammed.
[Setting procedure of the reverse feed
stitching]
1) Effective/ineffective of the reverse
feed sttchng pattern can be changed
over by pressng
swtch
1
.
When the reverse feed stitching pat -
tern is rendered effective, LED
C
lghts up, the number of sttches of
the reverse feed sttchng at sewng
start s dsplayed on
A
, and the num-
ber of sttches of the reverse feed
sttchng at sewng end s dsplayed
on ndcator
B
.
2) When the number of reverse feed
stitches display is not flashing on and
off, every press on swtch
3
changes over the reverse feed sttch-
ng mode from the "reverse feed
sttchng at sewng start," "double
reverse feed sttchng at sewng
start" and "no reverse feed sttchng
at sewng start."
In addton, every tme swtch
5
s pressed, the reverse feed sttch-
ng feature changes over from the
reverse feed sttchng at sewng end
to the double reverse sttch at sewng
end, then to no reverse feed sttchng
at sewng end, n turn.
Select a process (A, B, C or D) the number of stitches for which is to be changed by usng swtch
4
.
The number which is flashing on and off represents the process which is being set.
Change the number of stitches for
the selected process by usng swtch
5
and swtch
6
.
Press swtch
3
to confirm th e change you have made. (The number of sttches that can be set s 0 to
15.)
(Caution) the sewing machine cannot perform sewing when the display of the number of stitches for a
process is flashing on and off.
6
5 4 3
1
B
A
2
7
C
D
6
5 4 3
1
2 7
B
A
C
D