JUKI SC-922, Инструкция по эксплуатации

Страница: 4 / 58

– 2 –
1
2. Installing the motor unit
Install the motor unit on the table with the fitting bolt
asm. suppled wth the unt as accessores.
At ths tme, nsert the nuts and washers suppled
with the unit as accessories as shown in the figure
so that the motor unit can be securely fixed on the
table.
1) Press three bolts
1
suppled wth the unt as ac-
cessores nto the motor hangng bolt hole n the
table and fix them.
2) Temporarily tighten convex washer, spring
washer and nut on the sde where two bolts are
attached.
3) Hang the motor unt to the washer whch has
been temporarily tightened, and attach convex
washer, sprng washer and nut to the other bolt
on the opposte sde.
4) After adjustng the nstallng poston of the motor,
securely tghten the respectve nuts.
3. Installing the control box
2) Loosen four screws
2
suppled wth the mo-
tor unt as accessores, tghten screws
2
after
hanging control box unit
3
to the screws, and fix
control box unit
3
.
Spring washer
Nat
Convex washer
2
3
1
1) Attach bracket
1
suppled wth the unt usng
four supplied screws (M5 x 10) as shown in the
figure.
To use the SC-922 with the belt-drive type machine head, install the control box on the motor unit according
to the followng nstructon.