JUKI MO-6800D/DD20 Series, Инструкция по эксплуатации

Страница: 55 / 77

– 52 –
A
6-7. No. of pcs. counter
The number of pieces produced can be counted.
1) Referring to "6-3. Function setting" p.32, call the
function setting number P097 ( A ).
Press ❷ to display the No. of pcs. counter.
If you want to return to the normal sewing screen,
press
、 ❶
.
2) The current No. of pcs. counter is displayed ( B ).
It is possible to carry out sewing with the No. of pcs.
counter displayed on the operation panel.
On the LCD screen, the currently-selected function
setting (C - L, R) and ON/OFF state of the sensors (N
- Q) are displayed.
On the explanation screen, functions that
are not displayed when "DD22" is selected
with the "P125 Model selection" (setting of
this function is enabled under the Service
level) are included.
Every press on ❸ increases the current value on the No. of pcs. counter one by one.
The displayed number on the No. of pcs. counter on the LCD screen increases immediately.
Every press on ❹ decreases the current value on the No. of pcs. counter one by one.
The displayed number on the No. of pcs. counter on the LCD screen decreases immediately.
Function setting No. U02: With this function setting number, it is possible to change the number of times
of thread trimming to be counted before increasing the No. of pcs. counter by one.
Every time ❺ is pressed, the current set value of the number of times of thread trimming to be
counted before adding one to the No. of pcs. counter can be increased one by one.
Every time ❻ is pressed, the current set value of the number of times of thread trimming to be
counted before adding one to the No. of pcs. counter can be decreased one by one.
When the number of times of thread trimming counted reaches the set value of the function
setting number U02 by pressing ❺ and ❻ , one is added to the No. of pcs. counter.
Use this function to change the current value of the number of times of thread trimming in such
a case as to re-start sewing from the middle of production. It is not possible to display the cur
-
rent value of the number of times of thread trimming to be counted before adding one to the No.
of pcs. counter.
❶ ❷
❼ ❸
❹
❽
❾
B
❻ ❺
C-G
N-Q R
H-L