JUKI MO-6800D/DD20 Series, Инструкция по эксплуатации

Страница: 35 / 77

– 32 –
6-3. Function setting
Functions can be selected and set as described below.
1) Press ❶ .
The display on the display section A is changed
over to display the Function setting No. (P- * *).
(The display item that has been previously changed
is displayed unless you have turned the power OFF
after you changed the setting last time. )
* If the display on the screen fails to change, carry
out the operation procedure 1) again.
Be sure to re-turn ON the power switch after
10 seconds or more have passed after you
turned OFF the power switch. If you re-turn
ON the power switch immediately after you
have turned it OFF, the sewing machine may
fail to operate normally. In such a case, be
sure to re-turn ON the power switch.
Functions can be selected and set as de -
scribed below.
2) When you want to change the function setting num -
ber, change it by pressing ❺ and ❻ .
3) When you press ❷ after you have changed
the function setting number, the set value of the rel -
evant function setting number is displayed.
4) Change the set value by pressing ❺ and
❻
.
5) Confirm the set value by pressing ❷ .
* If you have changed the set value during sewing,
there is a parameter that enable the set value when
you depress the back part of the pedal.
6) If you keep ❼ held pressed without con firm -
ing the set value in step 5), only the set value that is
currently selected can be saved to memory. While
the set value is being saved, the word "SAVE" is
displayed on the screen.
After the set value has been saved, the screen re -
turns to the normal sewing screen.
Refer to
"6-8. Initialization of the function setting
data" p. 54 for how to initialize the function setting
data.
7) If you press ❾ without confirming the set val -
ue in step 5), the set value that is currently selected
can be changed to the value you have stored in
memory in step 6).
If you do not store the set value in memory as de -
scribed in step 6), the set value will be restored to
the initial value that has been factory-set at the time
of shipment.
❶
A
❺ ❻ ❷
❼
❾