JUKI MO-6800D/DD20 Series, Инструкция по эксплуатации

Страница: 38 / 77

– 35 –
No Item Description Range
Initial value
DD22 DD23
P034 Number of stitches to prevent cloth
trimming
This function setting number is enabled only in the case "DD23" is selected with the function
setting number "P125 Model selection". If the rear sensor detects the material before the front
thread trimmer operates, the operation of the front thread trimmer will be cancelled.
(0: OFF / 1: ON)
0-1 1 1
P035 Thread trimming time This function setting number is enabled only in the case "DD23" is selected with the function
setting number "P125 Model selection".
Thread trimmer operating time is set with this function setting number. (Unit: ms)
30-990 60 60
P036 Manual mode, thread trimming by
depressing back-part of foot pedal
ON / OFF
In the case the manual mode is selected, thread trimmer operation carried out by depressing
the back part of the foot pedal is set with this function setting number.
(0: Without thread trimming / 1: With thread trimming)
０
-1 0 0
P038 Tension release ON / OFF This function setting number is enabled only in the case "DD22" is selected with the function
setting number "P125 Model selection".
This function setting number is used for setting the tension release function to ON or OFF.
(0: OFF / 1: Front open / 2: Rear open / 3: Front and rear open)
0-3 3 0
P039 Tension-release continuing number
of stitches at the beginning of sew -
ing
This function setting number is enabled only in the case "DD22" is selected with the function
setting number "P125 Model selection".
This function setting number is used for setting the number of stitches to be sewn at the begin -
ning of sewing with the thread tension released continuously after the front sensor has detect -
ed the material. (Unit: stitch)
1-50 5 1
P040 Tension-release continuing number
of stitches at the end of sewing
This function setting number is enabled only in the case "DD22" is selected with the function
setting number "P125 Model selection".
This function setting number is used for setting the number of stitches to be sewn at the end of
sewing with the thread tension released continuously after the material has passed the inter -
mediate sensor. (Unit: stitch)
1-50 15 1
P041 Number of stitches to start releasing
the tension at the end of sewing
This function setting number is enabled only in the case "DD22" is selected with the function
setting number "P125 Model selection".
This function setting number is used for setting the delaying number of stitches to be sewn be -
fore the tension-release operation is started at the end of sewing after the material has passed
the intermediate sensor. (Unit: stitch)
0-50 0 0
P042 Manual thread trimming, duration This function setting number is enabled only in the case "DD22" is selected with the function
setting number "P125 Model selection".
This function setting number is used for setting the duration during which the thread trimmer
operation is continued after the hand switch is pressed and released. (Unit: x100ms) As long
as the hand switch is held pressed, the thread trimmer continues operation.
1-50 3 3
P043 Manual thread trimming, motor
speed
This function setting number is enabled only in the case "DD22" is selected with the function
setting number "P125 Model selection".
This function setting number is used for setting the number of revolutions of the motor that op -
erates the thread trimmer when the hand switch is pressed. (Unit: sti/min)
500-7000 3500 3500
P044 Manual thread trimming, the number
of times
This function setting number is enabled only in the case "DD23" is selected with the function
setting number "P125 Model selection".
This function setting number is used for setting the number of times to operate the thread trim -
mer. (Unit: Number of times)
1-5 1 1
P045 Manual thread trimming, time inter-
val
This function setting number is enabled only in the case "DD23" is selected with the function
setting number "P125 Model selection".
In the case the number of times of thread trimming is set to "2 or more" with the function set -
ting number P044, the time interval set with this function setting number (P045) is used.
(Unit: ms)
30-990 50 50