JUKI APW-896/IP-420 Скачать руководство пользователя страница 35

Страница: 35 / 140

− 31 −

(4) Sewing screen (Alternate sewing mode)

Symbol

Name of button

Description

INTERLINING SUPPLYING button

When ths button s pressed, nterlnng s suppled.

＊

This is displayed when “With” of

, automatc nterlnng supplyng devce s set

wth the optonal settng.

TYPE OF WELT CHANGE-OVER button

Type of welt change-over screen is displayed, and change-over of type of welt and
adjustment of parallelism of the binder can be performed.

CLAMP UP PROHIBITION AT SEWING END

button

When this button is held pressed, the clamp is returned in the lowered state at the time of

sewng end.

It is convenient to use this button at the time of adjustment of marking light and trial sewing.

DIRECT PATTERN LIST button

Direct pattern list screen is displayed and selection of the sewing data can be performed.

COUNTER CHANGE-OVER button

When this button is pressed, display of sewing counter and number of pcs. counter is
changed over. This button is displayed only when both sewing counter and number of pcs.

counter are ON.

COUNTER VALUE CHANGE button

Counter value whch s dsplayed at present s changed.

NEXT SEWING DATA CHANGE-OVER button Sewing pattern to be sewn next which is enclosed with yellow frame is changed over.

＊

This is not displayed when flap priority sewing selection

s ON.

BOBBIN THREAD (RIGHT) REMAINING
AMOUNT VALUE

This button detects reflecting light from bobbin and informs that bobbin thread remaining

amount s runnng out. When one sttchng completes, the counter value s subtracted, and

the count-up screen is displayed when “0” is reached.

＊

This button is displayed only when the reflecting light from bobbin is detected.

BOBBIN THREAD (LEFT) REMAINING
AMOU’NT VALUE

This button detects reflecting light from bobbin and informs that bobbin thread remaining

amount s runnng out. When one sttchng completes, the counter value s subtracted, and

the count-up screen is displayed when “0” is reached.

＊

This button is displayed only when the reflecting light from bobbin is detected.

MARKING LIGHT SETTING button

Marking light setting screen is displayed, and changeover of marking light irradiation position

and setting of change of marking light set value

and

are performed.

＊

It is possible to customize display/non-display of the respective buttons.

For the details, refer to

“

-13. CUSTOMIZING THE DATA INPUT SCREEN” p.80

Содержание APW-896/IP-420













































































































































Результаты поиска

Содержание APW-896/IP-420

Отзывы:

JUKI APW-896/IP-420, Инструкция по эксплуатации, Страница: 35 / 140

Результаты поиска

Содержание APW-896/IP-420

Отзывы: