JR XP6102, Инструкция по эксплуатации

Страница: 70 / 90

www.modelflight.com.au – World’s best source of JR products
12G
THROTTLE CUT SWITCH
This function assigns the Throttle Cut
switch to the push button located on
upper right front of the transmitter. The
Throttle Cut function is designed to
return the throttle trim to the lowest position instantly and keep this
position while the button is pressed.
This feature is used to “cut” or stop the
engine without changing the position
of digital throttle trim.
Go to Throttle Hold menu Change value
[THRO CUT]
INHIBIT
Go to Travel Adjust menu
Set function to Inhibit
Accessing the Throttle Cut Function
1. Place the transmitter power switch in
the On position.
2. Access the Function mode. To do so,
press the
D o w n
and
Select
keys
simultaneously. Press either the
U p
or
D o w n
key until THRO CUT appears in
the upper portion of the LCD screen.
3. Use the (+) and (-) keys to change the
value of the Throttle cut function.
Note : Pressing the Clear key will Inhibit
the Throttle Cut, turning it off until it
has been reactivated.
4. Access the TRAVEL ADJ mixing
function by pressing the
D o w n
key.
5. Access the THROTTLE HOLD
function by pressing the
U p
key.
6. Exit the THRO CUT function
by pressing the
D o w n
and
Select
keys simultaneously.
70 XP6102 - Helicopter Manual