JR XP6102, Инструкция по эксплуатации

Страница: 59 / 90

www.modelflight.com.au – World’s best source of JR products
MODEL COPY FUNCTION
11H
The Copy Selection function enables you
to copy all of the settings of the current
model to another model within the same
transmitter. This is very useful when setting up one aircraft several different
ways or when trying an alternative setup
for your current model.
Go to Modulation menu
Model number and name
to be copied
Change model to
copy to
[MODEL COPY]
#3 VENTURE
#2 HELI SPCM
Go to Model Type menu
Model number to
be copied to
Perform copy
function
Accessing the Model Copy Function
1. While pressing the
D o w n
and
Select
keys, move the transmitter’s power
switch to the On position.
2. Press either the
U p
or
Do w n
key until
MODEL COPY appears on the top left
of the LCD.
3. The upper number that appears is the
current model. This is important to note
as only the current model will be the
copied. Press the (+) or (-) keys to
select the desired program (lower
number) to copy the current model to.
4. Next, press the
Clear
key. The current
model will then be copied to the
selected model.
Note : Always make sure that the
accepting model is either free
of input or one which you no
longer want to retain in your
transmitter’s memory. Once the
copying process has been
completed, the information of the
accepting model is lost and the
current model is input as the new
data.
5. Press the
U p
key to access the
MODULATION function.
6. Press the
D o w n
key to access the
MODEL TYPE function.
7. Press the
D o w n
and
Select
keys
simultaneously to exit the MODEL
COPY function.
XP6102 - Helicopter Manual 59