JR XP6102, Инструкция по эксплуатации

Страница: 25 / 90

www.modelflight.com.au – World’s best source of JR products
TRAINER FUNCTION
5E
The XP6102 offers a programmable
trainer function with three trainer options:
Normal Mode - In this mode the
transmitter acts as a conventional buddy-
box system. The transmitter can be used
as a slave or as a master: however in
this mode, the reversing switches and
trims must be adjusted so the slave
transmitter matches the master
transmitter. In normal mode, when the
trainer switch is activated, the student
has control of all functions and switches.
Pilot Link - When Pilot Link mode is
used with the master transmitter, it allows
the slave transmitter to be adjusted to
factory defaults. The slave transmitter
can simply be programmed in a model
memory not being used and reset to
factory defaults, thus preventing the need
to synchronize the trims and reversing
switches on the slave transmitter.
Go to Switch Select menu
Also, when Pilot Link is used, the student
only has control of the 4 basic channels
(throttle, aileron, elevator, rudder) while
the trainer (master) retains control of all
other functions like gear, dual rate,
programmed mixes, etc. This allows a
pilot to have a test flight on a more
complex airplane without having to
remember complex switch positions.
Pilot
Link + Slave - This mode is used only
when the XP6102 is being used as a
slave transmitter and the other Master
transmitter has a Pilot Link program
active. By selecting Pilot Link + Slave the
transmitter is automatically in the correct
programming mode to work as a slave in
conjunction with another Pilot Link
equipped transmitter.
Model number and name
Change trainer
mode
[TRAINER]
#5 ALPHA 40
NORMAL
Go to Modulation menu
Trainer mode selected
Return to Normal mode
Accessing the Trainer Function
1. Move the power switch to the
On position while pressing the
D o w n
and
Select
keys to access
the System mode.
2. Press either the
U p
or
D o w n
key
until TRAINER appears at the too
of the LCD.
3. Press either the (+) or (-) keys to
change the Trainer Type type.
4. Pressing the
Clear
key will return the
trainer function to the "normal" setting.
5. Press the
D o w n
key to access the
MODULATION function.
6. Press the
U p
key to access the
SWITCH SEL function.
7. To exit the TRAINER function,
press the
D o w n
and
Select
keys simultaneously.
Note : The slave transmitter must always
be in PPM modulation to operate.
Pilot Link + Slave automatically selects
PPM modulation when activated.
When using other models of
transmitters it will be necessary
for the slave transmitter to be in
PPM mode for the XP6102.
XP6102 - Airplane Manual 25