JR XP6102, Инструкция по эксплуатации

Страница: 65 / 90

www.modelflight.com.au – World’s best source of JR products
SERVO REVERSING
12C
The Reverse Switch function is an
electronic means of reversing the throw
of a given channel (servo). All six channels of the XP6102 offer
reversible servo direction. This will
ease setup during the servo installation
into your helicopter.
Go to Sub Trim menu
Change servo direction
[REVERSING SW]
THR:N AIL:N
ELE:N RUD:N
GEA:N FLA:N
Go to D/R & Exp menu
Select channel to reverse
Reset direction to normal
Accessing the Servo Reversing Function
1. Place the transmitter switch in the
On position.
2. Access the Function mode by
pressing the
D o w n
and
Select
keys simultaneously.
3. Press either the
U p
or
D o w n
key until
the REVERSING SW appears in the
upper portion of the LCD.
4. Using your transmitter’s control sticks,
switches and potentiometers, move the
control surfaces of your aircraft. Note
the travel direction of each of the
corresponding control surfaces.
5. After determining which channel(s)
need to have the throw directions
reversed, use the
Select
key to call up
the appropriate channel.
6. Press either the (+) or (-) keys to
change the travel direction of the servo.
Pressing the Clear key returns the travel
direction to Normal.
7. You can observe the change in the
travel direction by moving the
appropriate control at this time.
8. Access the D/R & EXP function by
pressing the
D o w n
key.
9. Access the SUB TRIM function by
pressing the
U p
key.
10. Exit the SERVO REVERSING
function by pressing the
D o w n
and
Select
keys simultaneously.
XP6102 - Helicopter Manual 65