JPS JMD-STD-90A, Руководство пользователя

Страница: 142 / 149

www.jps.com.tw
141
14.4.6.3.2 BP2P Mark Adjustment-2

Pr.428：(M) P2P MARK Position(mm)

Pr.306：P2P Mark Reference Position

Pr.430：P2P MARK-Window

Pr.431：P2P ARC Ratio

Pr.432：P2P ARC Limit
DOx(081)：
BP2P Mark Adjustment2
Pr.306
+Pr.430 -Pr.430 +Pr.430 -Pr.430
Pr.428 Pr.428
DIx(034)：
DOx(080)：
Pr.306
P2P MARK Sensor Input
P2P-MARK Window
P2P-MARK Loss
※ Definitions & Rules：

Pr.430：P2P Mark Window=(Pr.306：P2P Mark Reference Position)
left and right open±Pr.430mm。
Use this kind of Mark adjustment，please set Pr.430 to maximum length。
【Note】when Pr.430=1*setting length，P2P Window will be 100%。

DOx(081)，P2P-MARK Loss is inactive at this kind of Mark adjustment。
※ Action Description：

When DIx(018) trigger，current position=0 mm。

when【Disable】DIx(019)：

When DIx(034) appeared，Travel-length position will be record = Pr.428

When【Enable】DIx(019)：

When DIx(034) appeared，Travel-length position will be record = Pr.428

If Pr.428 value inside DOx(080) range；then DOx(081)=OFF。

If Pr.428 value outside DOx(080) range；then DOx(081)=ON。

Mark Adjustment Rule：

If (Pr.428-Pr.306)* Pr.431(%) < Pr.432；Next Adjust-Value= (Pr.428-Pr.306)*Pr.431(%)

DIx(034)，P2P MARK Sensor Input ( DIx )

DIx(019)，P2P ARC Enable

DOx(080)，P2P：MARK Window

DOx(081)，P2P：MARK Loss
DIx(018)：
P2P Trigger
First Trigger Second Trigger Extend Trigger
Inside Window Outside Window