JPS JMD-STD-90A, Руководство пользователя

Страница: 117 / 149

www.jps.com.tw
116
14.4.2 BP2P Mode：Basic Point To Point：Digital Input
※ 14.4.2.1 BP2P Mode：Basic Point To Point：Digital Input

Search Home Related

DIx _ Select

032，P2P HOME SEARCH Start
When performing this function, the drive to find the origin of the trigger execution 。
【Note】 Relevant executive action, refer to relevant settings & curve example 。
Belong to trigger rising edge，trigger time = 30ms。
This sction must action under Pr.415：P2P Status=0。

DIx _ Select

033，P2P HOME DOG Switch
When the function activated, DIx (32) to find the P2P Home DOG 。
【Note】 Relevant executive action, refer to relevant settings & curve example 。
※ 14.4.2.2 BP2P Mode：Basic Point To Point：Digital Input

Mark Related

DIx _ Select

019，P2P ARC Enable (Auto Registration Control)
This function is defined as the action P2P-ARC Mark Auto Adjustment start 。
【Note】 Relevant executive action, refer to chapter 14.4.6.3.2。

DIx _ Select

034，P2P MARK Sensor Input ( DIx )
This function is defined as the P2P-(STD)Mark Input。
【Note】 Relevant executive action, refer to chapter 14.4.6.3.2。

DIx _ Select

037，P2P Check Mark then Move POS[15](constant)
This function is defined as the P2P Check Mark then Move POS[15]。
【Note】 Relevant executive action, refer to chapter 14.4.6.3.1。
Do not use DIx(036) or DIx(038) at the same time 。

DIx _ Select

036，P2P Enable Switch(For DIx(38))

DIx _ Select

038，P2P Check Mark then Move POS[15] (controlled by DIx(36))
This two functional group action is defined as when DIx (036) starts,
Perform DIx(038)：P2P Check Mark then Move POS[15] (controlled by DIx(36))。
【Note】 Relevant executive action, ，similar with DIx(037)。
Do not use with DIx(037) at the same time。

DIx _ Select

135，P2P MARK Sensor Input ( DIx, for Multi-Cancel/Continue)