Antivibration supports
Whenever necessary to reduce vibrations and noise
produced by the unit to a maximum, a set of steel
spring antivibratory supports can be used. These
should be installed between the chassis support of the
unit and the base or floor on which it is to sit.
This base must be solid and dimensioned in
accordance with the load to be supported.
The antivibratory support accessory for models
YLCA/YLHA 40, 50 and 60 includes 4 units, whereas
for models YLCA/YLHA 80, 100, 120 and 150
includes 6.
These spring supports should be distributed and
fastened in the drilled holes at the base of the cooler,
the location of which is detailed in the General
Dimensions section.
YLCA/YLHA 40
50
YLCA/YLHA 50 ÷ 150
Ø 10
Ø 75
125
14,5
80
86
115
14,5
1
User manual
1.1
General description of the unit
6
