Johnson & Johnson ASP STERRAD 100S, Руководство по установке

Страница: 33 / 44

Chapter 3. Installation
STERRAD
®
100S Installation Guide 33
Figure 6. Correctly Assembled Vacuum Stack.
System Configurations
Systems are shipped with the final, language-specific configurations yet
to be done. The final configuration information and parts are in a kit that
is shipped with the system. The receiving organization finishes the
system and returns the completion notification to ASP. The instructions
for this configuration are as follows:
Attach Machine Label
1. Remove side panels and rear panels.
2. Locate the label that is in the correct language for the country
receiving the unit.
3. Remove the rear cover of the AC enclosure.
4. Clean the lower left rear corner of the AC cover with 3M natural
cleaner (or equivalent) and attach the chosen label (item 2) to the
rear cover (item 6) as shown, so that it is readable. Press down firmly
to remove any trapped air.