Johnson & Johnson ASP STERRAD 100S, Руководство по установке

Страница: 8 / 44

Chapter 1. Installation Overview
STERRAD
®
100S Installation Guide
8
Environmental Conditions
Transport and Storage
Ambient Temperature -40 to +70° C (50 to 104° F)
Relative Humidity 10 to 100% including condensation
Atmospheric Pressure 500 hPa to 1060 hPa
Operation
Ambient Temperature +10 to 40° C (50 to 104° F)
Altitude -100 to 3000 m above msl (-330 to 10,000 ft above msl)
Relative Humidity 0 to 95% RH, non-condensing
Atmospheric Pressure 700 hPa to 1060 hPa
Surface The floor at the installation is flat and level to + 5 mm/M.
Installation Space Requirements In operation, the system shall not be placed closer than 50
mm (2 in) to a wall at the rear and/or sides of the system.
The system should be installed in a space of sufficient size
to permit access to all four sides of the system when the
system is rolled away from the rear and/or side walls a
distance of 3 meters (10 ft), the extent of the power cord.
Service access should allow for a minimum clearance of
one meter (3 ft) on all sides of the system.
Mobility The sterilizer is designed to be free standing and self
contained with no required connections other than the
electrical power cord. The sterilizer is equipped with
wheels that allow it to be rolled easily from one location to
another. The unit is also equipped with adjustable feet at
the front of the unit if leveling is required.