John Bean EEWB304B, Руководство по обслуживанию

Страница: 14 / 57

80-5
80-6
80-7
Checkout and maintenance
1-10
The display will change to 10.
“sAp” “E-1” “FIN” for one sec-
ond and the changes to “dis” “to” “FLA”
.
Pull the distance gauge to the outside flange of the backing 11.
collar, use the flat head of the calibration weight as an in
-
dex (80-5). After a short beep the machine displays
“bAC”
“H” “pOs” and changes to “tO” “FLA” “NgE”
.
Display will then change to 13.
“tO” “CAL” “sLg”
. Screw the
calibration weight onto the outside of the flange. Touch the
tip of the width gauge to the tip of the calibration slug and
hold it for one second or press the
“F”
button (80-7). The
display will change to
“sAp” “E-2” “FIN” for one second
followed by a tone indicating a successful calibration. unit
will then go into an idle state.
CALIBRATION COMpLETE
Touch the tip of the width gauge to the backing collar and 12.
hold it for one second or press the
<F>
button (80-6). The
display will change to
“bAC “H’ ‘pOs”
followed by a tone.
Return the SAPE arm to the home position.