JMR electronics MARLIN FC-SATA300/SAS, Руководство пользователя

Страница: 118 / 135

Now that you have reached the Configuration Port Editor Window, this is a read
only screen at this time.
The following fields are explained for the Controller Configuration Port Editor
Window.
Status Normal or Offline
Controller AUID Controller AUID that owns this port.
Controller ID 0 or 1: Controller 0 = 0; Controller 1 = 1;
Port Number Often numbered relative to either logical
modules or a network element as either Port 0
or 1. Port 0 = 0; Port 1=1.
Network Address An array of strings to identify the network
address, the last six (6) bytes of the Permanent
Address field. CIM Network address. FCID
(InfiniBand: LIDs) and FC-FS Address
Identifier.
Link Technology Fibre Channel 4Gbit - this is the interface link
type.
Link Speed 1Gb, 2Gb, 4Gb, unknown (actual or system
negotiated)
Loop ID Same as Link ID. Values: 0-0x7E = Valid or
Link/Loop is up. 0xFF = Invalid or Link/Loop
is down.
Port Mode Automatic, Point-to-Point, or Arbitrated Loop
(commonly called Loop)
Table 10. Controller Port Property Definitions
MARLIN TM
4-86
M MA AR RLLIIN N T TM M
16-Bay 4G FC-SATA300/SAS RAID Array Management Users Guide Rev B
Name Definition
Link Technology Fibre Channel with 4Gbit
Link Speed
A speed of either 1, 2, or 4Gbit is preset. The speed of data
transfer.
Port Mode
Automatic·
Point-to-Point
Arbitrated Loop
The user cannot change the Port Mode.
The system will use the default value.
The data transfer moves from a start point to the destination
point and then stops; not a loop.
Commonly called a Loop; data transfer travels in a
continuous path that makes a loop, not a straight line of
direction.