SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3121783
3-15
17.
Main Boom Telescope
This switch allows the operator to extend and
retract the main boom.
18.
Platform Rotate
This switch allows the operator to rotate the plat-
form to the right or left.
19.
Jib
This control allows the operator to raise and lower
the jib.
20.
Swing
This control allows the operator to swing the
boom assembly to the right or left.
21.
Right Side Track Drive And Steer
This control when moved forward or rearward
simultaneously with the left side track control (14),
allows the operator to move the machine in a
straight forward or reverse direction or, if each
control is moved individually or in opposite direc-
tions, to steer the machine.
22.
Platform Level Switch
NOTE:
The platform will auto-correct to level once another
function is activated. The platform will auto-correct to
level before the requested function is performed.
To manually Level Up, turn switch counter-clockwise and
hold until desired position is reached. To manually Level
Down, turn switch clockwise and hold until desired position
is reached.
23.
Display
Display shows status of machine and operating
information. Wait until a display screen appears
before starting operation.
Platform/Remote Control Station LCD Display
At machine start-up and during machine operation the main
LCD display screen (item 23 - Figure 3-3.) is activated. There
are eight (
8
) display positions which indicate machine status
during various stages of operation.
1
2
3
4
5
6
7
8
To
order
go
to
Discount-Equipment.com
