SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121783
6-17
Replacing Rubber Tracks
1.
Elevate the machine on firm, level and uniform sur-
face utilizing the outriggers.
2.
Remove the screws and remove cover 3 as shown
in figure.
3.
To loosen the track, slowly unscrew valve 1 in a
counter-clockwise direction. Do NOT exceed one
(1) rotation.
4.
Allow grease to drain. If grease does not drain,
slowly rotate the track.
5.
Insert three steel pipes 4 between the rollers of the
track. Turn the driving wheel backwards 5 to
engage the track tensioning wheel. Apply an out-
ward force 6 to lift the track from the track tension-
ing wheel.
Installation of Rubber Track
1.
Ensure all hydraulic cylinder grease have been
removed
2.
Align the track links with the wheel teeth. Position
the other end of the track on the track tensioning
wheel
3.
Slowly rotate the drive wheel in reverse while,
using one steel pipe, pushing the track plate inside
the frame.
4.
Verify the track links have engaged the wheel
teeth in the track tensioning wheel
5.
Adjust track tension (see Loosening/Tightening
track section).
3
1
2
4
5
6
To
order
go
to
Discount-Equipment.com
