SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-10
3121783
Extension Arm Internal Sliding Ring (if equipped)
Check Wear
•
Replace
•
Turntable Bolt Tightening
Check
•*
•
Platform Mount Pin Nuts
Check torque 148 ft. lb. (200 Nm)
•****
Extension Ropes and pulleys (if equipped)
Check Wear
•**
•*
Replace
•***
*
1st time interval then per chart thereafter
** At least every 3 months or 1000 hrs. of operation
*** At lease every 5 years or 2000 hrs of operation. Check every year. If torque is not correct, replace the nuts with new nuts of same specification.
Install dry without using grease or oil to specified torque.
**** At least once a year. Replace nuts if not properly torqued.
Table 6-10.
Component Maintenance Intervals - X1000AJ/X33JP - with Diesel Engine
Component
Operation
Pre-Start As Needed
Hours
10
50
100
250
500
1000 2000
SERV...
To
order go
to
Discount-Equipment.com
