JLG TOUCAN DUO, Руководство по обслуживанию

Страница: 12 / 108

Updated 06-2015
TOUCAN Duo
models
12
INTRODUCTION
Prior to any maintenance or repair procedure, it is
necessary to :
• Read and understand the operating and safety
procedures in this manual and in the Operator's
and Safety Handbook.
• Read each procedure in this manual to the end
before applying it to the machine.
• Ensure you have all the appropriate tools and
equipment necessary for the repair or
maintenance to be performed.
• Have all replacement parts ready to perform
the repair.
• Work in a clean, spacious and well-lit area..
• Wear all protection equipment (glasses,
gloves,...) appropriate for the operation to be
performed.
• Place the work platform in the following
configuration (unless otherwise specified) :
- on a firm, clean and horizontal floor.
- wheels choked in both directions.
- in retracted position.
- the contact key positioned to "O" and removed.
- battery plug disconnected.
- charger disconnected.
- each control panel must be tagged out.
Failure to respect instructions and safety
instructions described in this manual and in
Operator's and Safety Handbook could result
in death or serious injuries.
SAFETY INSTRUCTIONS CONTAINED IN THE
OPERATOR'S AND SAFETY HANDBOOK
APPLY ALSO DURING OPERATING CHECKS,
MAINTENANCE AND REPAIRS. THEY DO NOT
REPLACE NATIONAL, STATE OR LOCAL
WORK REGULATIONS, INDUSTRY
STANDARDS OR EMPLOYER'S WORK RULES.
Do not perform any operating control,
maintenance or repair :
1- If you are not qualified and trained to the
maintenance of THIS particular work platform.
2- If you have not read and understood the
operating and safety procedures described
in this manual and in the Operator's and
Safety Handbook for THIS particular work
platform.
3- If you are not familiar with regulations and
standards governing aerial work platforms and
their operation.
4- If you do not have necessary tools and
equipments.
YOUR SAFETY AND THAT OF PERSONS
WORKING ON AND AROUND THE WORK
PLATFORM MUST BE YOUR PRIME
CONCERN. ALL SAFETY COMPONENTS ON
THE WORK PLATFORM MUST BE
MAINTAINED IN PERFECT WORKING ORDER.
You will find in this manual blocks or
paragraphes containing the following
mentions:
DANGER, ATTENTION and NOTE. These
mentions are defined as follows :
A DANGER is used to emphasize that if an
operation, procedure or practice is not
followed exactly, death or serious injury to
personnel may result.
A CAUTION is used to emphasize that if an
operation, procedure, or practice is not
followed exactly, equipment damage may
result.
NOTE
A note is used to emphasize an important
procedure or condition.
DANGER
DANGER
DANGER
! CAUTION