JLG 1030P, Руководство по эксплуатации и безопасности

Страница: 29 / 56

SECTION 3 - MACHINE OPERATION
3121789
3-1
SECTION 3. MACHINE OPERATION
3.1 GENERAL
NOTICE
THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE APPLICATION AND OPER -
ATION. THE USER AND OPERATOR ARE RESPONSIBLE FOR CONFORMING WITH GOOD
SAFETY PRACTICES.
This section provides the necessary information needed to under -
stand control function and operation.
DO NOT RAISE PLATFORM UNLESS THE MACHINE IS ON A SMOOTH, FIRM SURFACE,
WITHIN THE LIMITS OF THE MAXIMUM OPERATING SLOPE, FREE OF OBSTRUCTIONS AND
HOLES.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL LEVERS OR TOG -
GLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT RETURN TO THE OFF OR
NEUTRAL POSITION WHEN RELEASED.
IF THE PLATFORM DOES NOT STOP WHEN A CONTROL SWITCH OR LEVER IS RELEASED, USE
THE EMERGENCY STOP SWITCH TO STOP THE MACHINE.
3.2 MACHINE DESCRIPTION
The machine is manually propelled machine with a work platform
mounted to an elevating armstack assembly. This machine’s
intended purpose is to provide personnel (with their tools & sup -
plies) access to areas above ground level.
The platform is raised and lowered by a control station in the plat
-
form or on the chassis. These control a hydraulic system which
extends a hydraulic cylinder within the armstack assembly.
An emergency lowering valve is provided underneath the ground
control console cover at the base of the machine to lower the plat -
form to the ground in an emergency if the operator in the platform
is unable to do so.
NOTICE
THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE APPLICATION AND OPER -
ATION. THE USER AND OPERATOR ARE RESPONSIBLE FOR CONFORMING WITH GOOD
SAFETY PRACTICES.