JLG 1030P, Руководство по эксплуатации и безопасности

Страница: 13 / 56

SECTION 1 - SAFETY PRECAUTIONS
3121789
1-5
• Minimum approach distance may be reduced if insulating barriers
are installed to prevent contact and they are rated for the voltage
of the line being guarded. These barriers shall not be part of (or
attached to) the machine. Minimum approach distance shall be
reduced to a distance within the designed working dimensions of
the insulating barrier. This determination shall be made by a quali -
fied person in accordance with the employer, local, or governmen -
tal requirements for work practices near energized equipment.
DANGER
DO NOT MANEUVER MACHINE OR PERSONNEL INSIDE PROHIBITED ZONE (MAD). ASSUME
ALL ELECTRICAL PARTS AND WIRING ARE ENERGIZED UNLESS KNOWN OTHERWISE.
Tipping Hazards
•
Ensure that the ground conditions are adequate to support the
maximum tire load indicated on the tire load decals located on the
chassis adjacent to each wheel. Do not operate machine on
unsupported surfaces.
• The user must be familiar with the operating surface. Do not
exceed the allowable sideslope and grade.
Table 1-1. Minimum Approach Distances (M.A.D.)
VOLTAGE RANGE
(Phase to Phase)
MINIMUM APPROACH DISTANCE
in Feet (Meters)
0 to 50 KV 10 (3)
Over 50KV to 200 KV 15 (5)
Over 200 KV to 350 KV 20 (6)
Over 350 KV to 500 KV 25 (8)
Over 500 KV to 750 KV 35 (11)
Over 750 KV to 1000 KV 45 (14)
NOTE: This requirement shall apply except where employer, local or govern -
mental regulations are more stringent.