JLG 1030P, Руководство по эксплуатации и безопасности

Страница: 18 / 56

SECTION 1 - SAFETY PRECAUTIONS
1-10
3121789
1.5 MOVING, LIFTING AND REPOSITIONING
General
• Never allow personnel in platform while moving, lifting or reposi -
tioning the machine.
• This machine shall not be towed by a vehicle.
•
Do not move assembled unit on wheels over soft or uneven sur -
faces, or over obstructions, bumps, debris, etc.
•
Disassemble unit to transport over uneven or sloped ground, or in
a vehicle.
•
Ensure platform is fully retracted and completely empty of tools
prior to disassembly, lifting or hauling.
•
Refer to the Machine Operation section of this manual for lifting
information.
Additional Safety Information
• Do not use machine as ground for welding.
1.6 MAINTENANCE
This sub-section contains general safety precautions which must be
observed during maintenance of this machine. Additional precau -
tions to be observed during machine maintenance are inserted at
the appropriate points in this manual and in the Service and Mainte -
nance section of this manual. It is of utmost importance that main -
tenance personnel pay strict attention to these precautions to avoid
possible injury to personnel or damage to the machine or property.
A maintenance program must be established by a qualified person
and must be followed to ensure that the machine is safe.
Maintenance Hazards
• Shut off power to all controls and ensure that all moving parts are
secured from inadvertent motion prior to performing any adjust -
ments or repairs.
•
Never work under an elevated platform until it has been fully low -
ered to the full down position, if possible, or otherwise supported
and restrained from movement with appropriate safety props,
blocking, or overhead supports.
•
DO NOT attempt to repair or tighten any hydraulic hoses or fittings
while the machine is powered on or when the hydraulic system is
under pressure.