JLG 1030P, Руководство по эксплуатации и безопасности

Страница: 42 / 56

SECTION 4 - EMERGENCY PROCEDURES
4-2
3121789
Righting of Tipped Machine
Before righting a tipped machine, check machine for any damage
that may prevent it from sitting properly on its base wheels once in
a vertical position, (i.e., base wheels damaged, base frame distorted,
etc.). Use a crane, forklift or other suitable lifting equipment and
carefully lift the machine to an upright position.
NOTICE
FOLLOWING ANY INCIDENT, THOROUGHLY INSPECT THE MACHINE AND TEST ALL
FUNCTIONS. DO NOT ELEVATE PLATFORM UNTIL IT IS CERTAIN ALL DAMAGE HAS
BEEN REPAIRED (IF REQUIRED) AND ALL CONTROLS ARE OPERATING CORRECTLY.
4.3 INCIDENT NOTIFICATION
JLG Industries, Inc. must be notified immediately of any incident
involving a JLG product. Even if no injury or property damage is evi -
dent, JLG must be contacted by telephone and provided with all
necessary details.
•
USA: 877-JLG-SAFE (554-7233)
•
EUROPE: (32) 0 89 84 82 20
•
AUSTRALIA: (61) 2 65 811111
•
E-mail: productsafety@jlg.com
Failure to notify the manufacturer of an incident involving a JLG
Industries product within 48 hours of such an occurrence may void
any warranty consideration on that particular machine.
NOTICE
FOLLOWING ANY INCIDENT, THOROUGHLY INSPECT THE MACHINE. DO NOT ELEVATE
PLATFORM UNTIL YOU ARE SURE THAT ALL DAMAGE HAS BEEN REPAIRED, AND THAT
ALL CONTROLS ARE OPERATING CORRECTLY. TEST ALL FUNCTIONS FIRST FROM THE
GROUND CONTROL STATION, THEN FROM THE PLATFORM CONTROL CONSOLE.